Amsoil Motor Oil Dealer US and Canada-AMSOIL Saber Professional 100:1 Pre Mix

AMSOIL Saber™ Synthetic 100:1 Pre-Mix 2-Cycle Oil

Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
AMSOIL Saber™ Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, Saber 2-Cycle Oil has excellent lubricity and cleanliness properties to control friction and prevent wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973. ISO-L-EGD, JASO FD, API TC

See Pricing Information or Place an Order

Package sizes include:

1.5-oz Pillow Pack
1.5-oz. Pillow Packs (case of 48)
3.5-oz. Bottle
3.5-oz. Bottles (case of 12)
8-oz. Bottle
8-oz. Bottles (case of 12)
1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum

AMSOIL 2-Cycle Oil Lineup
ATP Applications
"The Fabulous Four"

hp Injector Synthetic 2-Cycle Oil (HPI)
Saber Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
INTERCEPTOR Synthetic 2-Cycle Oil (AIT)
DOMINATOR Synthetic 2-Cycle Racing Oil (TDR)

Saber Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5- oz. bilingual (English/Spanish) container which is ideal for treating the 2 – 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professional is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high-temperature detergent additives to prevent hard carbon deposits from forming in these hot-operating motors. Saber Professional is “smokeless” and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, Saber Professional eliminates mix ratio confusion. Saber Professional is recommended for pre-mix where ISO-L-EGD, JASO FD or API TC is specified.

Applications (2-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

2.6 oz.	per 1 U.S. gallon	50:1
8 oz.	per 5 U.S. gallons	80:1
1.3 oz.	per 1 U.S. gallon	100:1
8 oz.	per 6 U.S. gallons	100:1

TYPICAL TECHNICAL PROPERTIES Saber™ Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	13.5
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	99
Viscosity Index (ASTM D-2270)	136
Pour Point °C (°F) (ASTM D-97)	-36 (-33)
Flash Point °C (°F) (ASTM D-92)	114 (237)
Fire Point °C (°F) (ASTM D-92)	114 (237)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.